Animal Glue: Difference between revisions

Revision as of 21:27, 12 January 2018

Redirect to:

@@ Line 1: / Line 1: @@
-[[Category:Equipment]]
+#REDIRECT [[Adventuring Gear#Animal Glue]]
-{{Equipment
-| Name = Animal Glue
-| URL-Name = Animal_Glue
-| Cost = 5 sp
-| Weight = 0.5
-| Description = This simple glue is created by extensively boiling animal skin, bones, hooves, horn, and tendons until they turn into a ocher syrup that cools when it hardens. Before you use animal glue, you must heat it until it liquefies. You normally apply it with a brush and hold the pieces together for a minute, at which point it is cooled and hardened. The glue is sufficient to coat 1 square foot of surface, or (because of waste and spills) up to 40 smaller applications of approximately 2 square inches each. Pulling apart a large glued surface (at least 1 square foot) requires a DC {{Skill-DC|Hard|1}} [[Might]] check. Pulling apart a small glued surface (anything less than 1 square foot) requires a DC {{Skill-DC|Challenging|1}} [[Might]] check. Animal glue slowly dissolves in water, reducing the DC needed to break it by 1 per 10 minutes. It softens if heated, even with steam, reducing the Strength DC needed to break it by 1 per minute.
-| ShortDesc = A simple glue for sticking two objects together semi-permanently.
-| Craft-Skill = Tanner
-| Craft-DC = {{Skill-DC|Challenging|1}}
-| Craft-Notes =
-}}