Animal Glue: Difference between revisions

From Epic Path
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
{{Equipment
{{Equipment
| Name = Animal Glue
| Cost=<onlyinclude>{{#ifeq:{{{transcludesection|Cost}}}
| URL-Name = Animal_Glue
| Cost| 5 sp
| Cost = 5 sp
}}</onlyinclude>
| Weight = 0.5
 
| Description = This simple glue is created by extensively boiling animal skin, bones, hooves, horn, and tendons until they turn into a ocher syrup that cools when it hardens. Before you use animal glue, you must heat it until it liquefies. You normally apply it with a brush and hold the pieces together for a minute, at which point it is cooled and hardened. The glue is sufficient to coat 1 square foot of surface, or (because of waste and spills) up to 40 smaller applications of approximately 2 square inches each. Pulling apart a large glued surface (at least 1 square foot) requires a DC {{Skill-DC|Hard|1}} [[Might]] check. Pulling apart a small glued surface (anything less than 1 square foot) requires a DC {{Skill-DC|Challenging|1}} [[Might]] check. Animal glue slowly dissolves in water, reducing the DC needed to break it by 1 per 10 minutes. It softens if heated, even with steam, reducing the Strength DC needed to break it by 1 per minute.
| Weight=<onlyinclude>{{#ifeq:{{{transcludesection|Weight}}}
| ShortDesc = A simple glue for sticking two objects together semi-permanently.
| Weight| 0.5
| Craft-Skill = [[Profession (Tanner)]]
}}</onlyinclude>
| Craft-DC = {{Skill-DC|Challenging|1}}
 
| Craft-Notes =  
| Description = This simple glue is created by extensively boiling animal skin, bones, hooves, horn, and tendons until they turn into a ocher syrup that cools when it hardens. Before you use animal glue, you must heat it until it liquefies. You normally apply it with a brush and hold the pieces together for a minute, at which point it is cooled and hardened. The glue is sufficient to coat 1 square foot of surface, or (because of waste and spills) up to 40 smaller applications of approximately 2 square inches each. Pulling apart a large glued surface (at least 1 square foot) requires a DC {{Skill-DC|Hard|1}} [[Might]] check. Pulling apart a small glued surface (anything less than 1 square foot) requires a DC {{Skill-DC|Challenging|1}} [[Might]] check. Animal glue slowly dissolves in water, reducing the DC needed to break it by 1 per 10 minutes. It softens if heated, even with steam, reducing the Might skill DC needed to break it by 1 per minute.
 
| ShortDesc=<onlyinclude>{{#ifeq:{{{transcludesection|ShortDesc}}}
| ShortDesc| A simple glue for sticking two objects together semi-permanently.
}}</onlyinclude>
 
| Craft-Skill=<onlyinclude>{{#ifeq:{{{transcludesection|Craft-Skill}}}
| Craft-Skill| [[Profession (Tanner)]]
}}</onlyinclude>
 
| Craft-DC=<onlyinclude>{{#ifeq:{{{transcludesection|Craft-DC}}}
| Craft-DC| {{Skill-DC|Challenging|1}}
}}</onlyinclude>
 
| Craft-Notes=<onlyinclude>{{#ifeq:{{{transcludesection|Craft-Notes}}}
| Craft-Notes|
}}</onlyinclude>
 
}}
}}

Revision as of 15:04, 13 January 2018

  • Cost: 5 sp
  • Weight: 0.5 lbs.
This simple glue is created by extensively boiling animal skin, bones, hooves, horn, and tendons until they turn into a ocher syrup that cools when it hardens. Before you use animal glue, you must heat it until it liquefies. You normally apply it with a brush and hold the pieces together for a minute, at which point it is cooled and hardened. The glue is sufficient to coat 1 square foot of surface, or (because of waste and spills) up to 40 smaller applications of approximately 2 square inches each. Pulling apart a large glued surface (at least 1 square foot) requires a DC 19 Might check. Pulling apart a small glued surface (anything less than 1 square foot) requires a DC 15 Might check. Animal glue slowly dissolves in water, reducing the DC needed to break it by 1 per 10 minutes. It softens if heated, even with steam, reducing the Might skill DC needed to break it by 1 per minute.