Animal Glue: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 8: | Line 8: | ||
}}</onlyinclude> | }}</onlyinclude> | ||
| Description = This simple glue is created by extensively boiling animal skin, bones, hooves, horn, and tendons until they turn into a ocher syrup that cools when it hardens. Before you use animal glue, you must heat it until it liquefies. You normally apply it with a brush and hold the pieces together for a minute, at which point it is cooled and hardened. The glue is sufficient to coat 1 square foot of surface, or (because of waste and spills) up to 40 smaller applications of approximately 2 square inches each. Pulling apart a large glued surface (at least 1 square foot) requires a DC {{Skill-DC|Hard|1}} [[Might]] check. Pulling apart a small glued surface (anything less than 1 square foot) requires a DC {{Skill-DC|Challenging|1}} [[Might]] check. Animal glue slowly dissolves in water, reducing the DC needed to break it by 1 per 10 minutes. It softens if heated, even with steam, reducing the Might skill DC needed to break it by 1 per minute. | | Description=<onlyinclude>{{#ifeq:{{{transcludesection|Description}}} | ||
| Description| This simple glue is created by extensively boiling animal skin, bones, hooves, horn, and tendons until they turn into a ocher syrup that cools when it hardens. Before you use animal glue, you must heat it until it liquefies. You normally apply it with a brush and hold the pieces together for a minute, at which point it is cooled and hardened. The glue is sufficient to coat 1 square foot of surface, or (because of waste and spills) up to 40 smaller applications of approximately 2 square inches each. Pulling apart a large glued surface (at least 1 square foot) requires a DC {{Skill-DC|Hard|1}} [[Might]] check. Pulling apart a small glued surface (anything less than 1 square foot) requires a DC {{Skill-DC|Challenging|1}} [[Might]] check. Animal glue slowly dissolves in water, reducing the DC needed to break it by 1 per 10 minutes. It softens if heated, even with steam, reducing the Might skill DC needed to break it by 1 per minute. | |||
}}</onlyinclude> | |||
| ShortDesc=<onlyinclude>{{#ifeq:{{{transcludesection|ShortDesc}}} | | ShortDesc=<onlyinclude>{{#ifeq:{{{transcludesection|ShortDesc}}} | ||
Revision as of 18:51, 1 February 2018
- Cost: 5 sp
- Weight: 0.5 lbs.
This simple glue is created by extensively boiling animal skin, bones, hooves, horn, and tendons until they turn into a ocher syrup that cools when it hardens. Before you use animal glue, you must heat it until it liquefies. You normally apply it with a brush and hold the pieces together for a minute, at which point it is cooled and hardened. The glue is sufficient to coat 1 square foot of surface, or (because of waste and spills) up to 40 smaller applications of approximately 2 square inches each. Pulling apart a large glued surface (at least 1 square foot) requires a DC 19 Might check. Pulling apart a small glued surface (anything less than 1 square foot) requires a DC 15 Might check. Animal glue slowly dissolves in water, reducing the DC needed to break it by 1 per 10 minutes. It softens if heated, even with steam, reducing the Might skill DC needed to break it by 1 per minute.
- Crafting: Profession (Tanner) (DC 15)